Flexcon dermaflex™
TT 200 H-566 55 LA k
DermaFLEX™ TT 200 H-566 55 LA K
Features and Benefits
- 2.0 mil thick transfer tape suitable for mounting & bonding applications, such as medical device attachment to the body
- H-566 high-tack acrylic adhesive with high strength for extended wear, such as attachment of long-term wearable devices
- Backed with a 55-lb. bleached kraft release liner suitable for roll form converting
technical data
Values
|
Thickness (Mils[microns])
|
---|---|
Adhesive
|
1.9-2.1 (48-53) +/- 0.1 (3)
|
Film
|
3.2 (81) +/- 10 %
|
Adhesion properties
Ultimate Peel From
|
Average Oz/In
|
(N/m)
|
---|---|---|
Acrylic
|
146
|
(1606)
|
Glass
|
129
|
(1419)
|
Polypropylene
|
22
|
(242)
|
Stainless Steel
|
99
|
(1089)
|
Electrical properties
Property
|
Value
|
Test Method
|
---|---|---|
Expected Shear
|
Room Temp (hours): 5
|
ASTM D 3654 Method A, a. 1 hr. dwell, b. 1 sq. in. surface, c. 4 lb. load
|
Tack (gm/sq cm)
|
1260
|
ASTM D 2979
|
Storage Stability
|
Two years stored at 70°F (21°C) and 50% relative humidity
|
Product ID # FLX068435
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.