Flexcon dermaflex™
NWP 240 white h-520 90 PFW
DermaFLEX™ NWP 240 WHITE H-520 90 PFW
Features and Benefits
- NWP (Non-Woven Polyester) is a soft, porous fabric substrate that allows maximum breathability
- H-520 general purpose acrylic adhesive with moderate strength
- H-520 is ideal for general use securement in applications such as medical tapes
- Backed with a 90-lb. moisture stable polycoated layflat release liner suitable for roll form, roll to sheet, and sheet form converting
technical data
|
Values
|
Thickness (Mils[microns])
|
|---|---|
|
Film
|
18.0 (457) +/- 15 %
|
|
Adhesive
|
1.9-2.1 (48-53) +/- 0.1 (3)
|
|
Liner
|
6.9 (175) +/- 10 %
|
Adhesion properties
|
Ultimate Peel From
|
Average Oz/In
|
(N/m)
|
|---|---|---|
|
Acrylic
|
124
|
(1364)
|
|
Glass
|
99
|
(1089)
|
|
Polypropylene
|
24
|
(264)
|
|
Stainless Steel
|
107
|
(1177)
|
Electrical properties
|
Property
|
Value
|
Test Method
|
|---|---|---|
|
Expected Shear
|
Room Temp (hours): 3
|
ASTM D 3654 Method A, a. 1 hr. dwell, b. 1 sq. in. surface, c. 4 lb. load
|
|
Tack (gm/sq cm)
|
400
|
ASTM D 2979
|
|
Storage Stability
|
Two years stored at 70°F (21°C) and 50% relative humidity
|
Product ID # FLX068290
All of the descriptive information, the typical performance data, and recommendations for the use of FLEXcon products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by FLEXcon. All purchasers of FLEXcon products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of FLEXcon is authorized to give any warranty, guarantee, or make any representation in addition or contrary to the above.
