Avery Dennison
MED 5725P
Single-Coated Nonwoven
MED 5725P is a single-coated, white, embossed, soft polyethylene nonwoven with a porous acrylic adhesive. This product’s unique construction creates a high MVTR, allowing air and moisture to pass freely through the breathable adhesive and nonwoven carrier, which can support extended wear and reduce the likelihood of skin maceration in some applications.
Typical Application
Designed for ostomy applications.
Features and Benefits
- Conformable
- Highly breathable
- Extended wear time
- Heat sealable
- Die-cuttable
- Gamma and EtO sterilizable
|
Physical Properties (Not intended as a specification.)
|
Test Method**
|
Typical Values*
|
|---|---|---|
|
Peel Adhesion on Polyethylene (PE)
|
TDS-01
|
0.8 lbf/in 3.5 N/25 mm
|
|
Peel Adhesion on Stainless Steel (SS)
|
TDS-05
|
1.0 lbf/in 4.4 N/25 mm
|
|
Liner Release
|
TDS-06
|
1.8 oz/in 50 g/25 mm
|
|
Finat Tack
|
TDS-07
|
2.2 lbf/in 10 N/25 mm
|
|
Static Shear
|
TDS-12
|
20 minutes
|
|
MVTR
|
TDS-16
|
120 g/100 in2 per 24 hr 1800 g/m2 per 24 hr
|
|
Product Construction
|
Typical Values*
|
Description
|
|---|---|---|
|
Carrier Thickness
|
23.6 mils 600 µm
|
White, embossed LDPE nonwoven
|
|
Adhesive Thickness
|
2.0 mils 50 µm
|
Porous acrylic adhesive designed for medical applications
|
|
Release Liner Thickness
|
3.1 mils 80 µm
|
White single-coated kraft
|
MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.
STORAGE AND SHELF LIFE
Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.