Avery Dennison
MED 5719P

Single-Coated Nonwoven

MED 5719P is a single-coated, white, embossed, polyester nonwoven with a porous acrylic adhesive. This product’s unique construction creates a high MVTR, allowing air and moisture to pass freely through the breathable adhesive and nonwoven carrier, which can support extended wear and reduce the likelihood of skin maceration in some applications.


Typical Application

Designed for ostomy applications.

documents

Technical Data sheet

Features and Benefits
  • Conformable
  • Highly breathable
  • Heat sealable
  • Extended wear time
  • Gamma and EtO sterilizable
Physical Properties (Not intended as a specification.)
Test Method**
Typical Values*
Peel Adhesion on Polyethylene (PE)
TDS-01
0.6 lbf/in 2.5 N/25 mm
Peel Adhesion on Stainless Steel (SS)
TDS-05
1.1 lbf/in 4.8 N/25 mm
Liner Release
TDS-06
1.3 oz/in 35 g/25 mm
Finat Tack
TDS-07
2.5 lbf/in 11 N/25 mm
Static Shear
TDS-12
20 minutes
MVTR
TDS-16
130 g/100 in2 per 24 hr 2000 g/m2 per 24 hr
Product Construction
Typical Values*
Description
Carrier Thickness
11.8 mils 300 µm
White, embossed polyester nonwoven
Adhesive Thickness
2.0 mils 50 µm
Porous acrylic adhesive designed for medical applications
Liner Thickness
3.1 mils 80 µm
White single-coated kraft

MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.

STORAGE AND SHELF LIFE

Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.