uk-flag

Avery Dennison
MED 5712P

Single-Coated Nonwoven

MED 5712P is a single-coated, tan spunlace nonwoven with a porous acrylic adhesive. This product’s unique construction results in a high MVTR, allowing air and moisture to pass freely through the breathable adhesive and nonwoven carrier, which can support extended wear and reduce the likelihood of skin maceration in some applications.


Typical Application

Designed for TENS electrodes and other devices where good skin adhesion, comfort and breathability are desired.

documents

Technical Data sheet

Features and Benefits
  • Conformable
  • Moisture resistant 
  • Breathable
  • Heat sealable
  • Die-cuttable
  • Gamma and EtO sterilizable
Physical Properties (Not intended as a specification.)
Test Method**
Typical Values*
Peel Adhesion on Polyethylene (PE)
TDS-01
0.7 lbf/in 3.0 N/25 mm
Peel Adhesion on Stainless Steel (SS)
TDS-05
1.0 lbf/in 4.4 N/25 mm
Liner Release
TDS-06
1.9 oz/in 55 g/25 mm
Finat Tack
TDS-07
2.4 lbf/in 10 N/25 mm
Static Shear
TDS-12
40 minutes
MVTR
TDS-16
150 g/100 in2 per 24 hr 2300 g/m2 per 24 hr
Product Construction
Typical Values*
Description
Carrier Thickness
6.0 mils 150 µm
Tan spunlace nonwoven
Adhesive Thickness
1.2mils 30 µm
Acrylic adhesive designed for medical applications
Liner Thickness
2.6 mils 65 µm
White super-calendered glassine

MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.

STORAGE AND SHELF LIFE

Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.