Avery Dennison
MED 5610SI
Single-Coated, Duolaminate Foam with a Soft Silicone Adhesive
MED 5610SI is a single-coated, white, soft, conformable, thin polyethylene foam with a soft silicone adhesive (SSA). This product’s soft silicone adhesive will provide a stable anchor to the skin, while being repositionable and easy to remove.
Typical Application
Designed for patient monitoring and wearable devices where limited repositioning and/or gentle release is required.
Features and Benefits
- Gentle and soft adhesion to the skin
- Repositionable
- Secure fixation
- Moisture resistant
- Thin and conformable
- Non irritating, non sensitizing, skin friendly
- Minimal epidermal stripping and less pulling of hair**
- EtO sterilizable
Physical Properties (Not intended as a specification.)
|
Test Method**
|
Typical Values*
|
---|---|---|
Silicone Adhesive Coat Weight
|
TM043
|
150 gsm
|
Silicone Peel Adhesion (Polycarbonate Plate)
|
TM040
|
1 N/25mm
|
Silicone Liner Release
|
TM020
|
0.05 N/25mm
|
Product Construction
|
Typical Values*
|
Description
|
---|---|---|
Carrier Thickness
|
0.04in 1.0mm
|
White polyethylene foam
|
Adhesive Coat Weight
|
150 gsm
|
Soft silicone adhesive designed for medical applications
|
Release Liner Thickness
|
3.7mils 95µm
|
Embossed HDPE film
|
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.
STORAGE AND SHELF LIFE
Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.