Avery Dennison
MED 5022
Single-Coated Film
MED 5022 is a repositionable single-coated clear polyurethane film with a rubber-based adhesive. This product’s unique formulation allows for initial removal and repositioning for skin contact applications. The product is also breathable through the adhesive and polyurethane film.
Typical Application
Designed for applications requiring initial repositionability and breathability, including but not limited to vascular access dressings, surgical drapes and wound care applications.
Features and Benefits
- Transparent
- Breathable
- Absorptive
- Conformable and flexible
- Gentle and soft adhesion to the skin
- Repositionable
- Cost-effective
- Gamma and EtO sterilizable
|
Physical Properties (Not intended as a specification.)
|
Test Method**
|
Typical Values*
|
|---|---|---|
|
Adhesion on HDPE
|
TDS-02
|
1 lbf/in 4.5 N/25 mm
|
|
Peel Adhesion on Stainless Steel (SS)
|
TDS-03
|
1.4 lbf/in 5.9 N/25 mm
|
|
90° Release
|
TDS-06
|
1.5 lb/in 6.4 N/25 mm
|
|
Reverse Tack
|
TDS-09
|
4.4 lbf/in 19.1 N/25 mm
|
|
MVTR
|
TDS-16
|
41 g/100 in2 per 24 hr 610 g/m2 per 24 hr
|
|
Elongation Machine Direction
|
TDS-15
|
734 lbf/in 3213 N/25mm
|
|
Elongation Cross Direction
|
TDS-15
|
757 lbf/in 3314 N/25mm
|
|
Load at Break Machine Direction
|
TDS-15
|
10 lbf/in 44 N/25mm
|
|
Load at Break Cross Direction
|
TDS-15
|
11 lbf/in 48 N/25mm
|
|
Product Construction
|
Typical Values*
|
Description
|
|---|---|---|
|
Carrier Thickness
|
1 mil 25 µm
|
Clear polyurethane film with polyethylene cast sheet
|
|
Adhesive Thickness
|
3.5 mils 90 µm
|
Rubber based adhesive with additives to allow for respositionability and breathability
|
|
Release Liner Thickness
|
2 mils 50 µm
|
Siliconized polyester
|
MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.
STORAGE AND SHELF LIFE
Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.